Pipe cross

A pipe cross is a kind of pipe fitting that be used in the place where four pipes meet together. The pipe cross may have one inlet and three outlets, or there inlets and one outlet. The diameter of the outlet and inlet can be the same and can also be different. That is to say, straight cross and reducing cross are both availabe.

Features of Pipe cross:

  • There are three female openings in a T shaped pipe cross.
  • There are straight pipe crosss which have the same size openings.
  • Reducing pipe crosss have one opening of different size and two openings of the same size.
  • There are sanitary pipe crosss which are used in waste lines. These kind of pipe crosss have a curved branch which is designed for a clean out plug. They are used to prevent obstruction of waste.
  • A cross pipe cross has four equal sized female openings.
  • A wing pipe cross has lugs to fasten the fitting to a wall or stud.
  • A compression pipe cross uses compression fittings on two or more ends.
  • A test pipe cross has a threaded opening. This opening is used in conjunction with a threaded plug for a clean-out opening on a drain pipe.

Buying Tips of pipe cross:

What should buyers consider for bulk purchase of pipe cross?

  • Type of pipe cross—whether welded or seamless
  • Standard
  • Size and dimension
  • Wall thickness
  • Material of construction
  • Durability and Economical
  • High pressure and temperature resistance
  • Corrosion resistance etc.

Pipe cross, LT, Lateral cross , RT, Reducing cross, cross fittings accord to ANSI, ISO, JIS and DIN Standards, Measures 1/2 to 56 Inches.

  • Size range: 1/2 to 20 inches
  • Types: Straight cross, Reducing cross, Y-type
  • Pressure: SCH5 to SCH160
  • Standard: ANSI B16.9/B16.28, MSS SP-43/SP-75

The fitting not only played a role in conection the cossing pipeline but also can control the volume by designed with different dimension of cross ends,sometimes we also adopt rib to reinforce the mechanical property when face hard woeking conditions.

Pattern
Weld
Seamless

Nominal size

1/2”-48” (DN15-DN1200)

1/2”-20” (DN15-DN500)

Wall thickness

2-100mm

2-50mm

Bend radius

SCH5S-SCH160 ,XXS

SCH5-SCH160

Type

cross/reducing cross

cross/reducing cross

Applications of pipe cross:

Pipe crosss are widely used in various commercial and industrial applications. Industrial applications include:
  • Chemical processing
  • Petroleum
  • Pulp/paper
  • Refining
  • Textile
  • Waste treatment, Marine
  • Utilities/power generation
  • Industrial equipment
  • Automotive
  • Gas compression and distribution industries
  • Pipe crosss are also recommended for industrial plant fluid power systems.

Materials

  • Carbon scrossl: ASTM/ASME A234 WPB-WPC
  • Alloy scrossl: ASTM/ASME A234 WP 1-WP 12-WP 11-WP 22-WP 5-WP 91-WP 911
  • Stainless scrossl: ASTM/ASME A403 WP 304-304L-304H-304LN-304N
  • ASTM/ASME A403 WP 316-316L-316H-316LN-316N-316Ti
  • ASTM/ASME A403 WP 321-321H ASTM/ASME A403 WP 347-347H
  • Low temperature scrossl: ASTM/ASME A402 WPL 3-WPL 6
  • High performance scrossl: ASTM/ASME A860 WPHY 42-46-52-60-65-70

Bending, squeezing, pressing, forging, machining and more

ASME B16.9 Buttweld Cross Available Types

ANSI/ASME B16.9 Butt weld Equal Cross
  • Buttweld Equal Cross
  • Reducing Cross Fittings
  • ASME B16.9 Unequal Cross
  • Buttweld Straight Cross
  • ANSI B16.9 Buttweld Cross
  • Buttweld Cross Pipe Fittings
  • Equal Cross Fitting
  • Buttweld Reducing Cross
  • Butt Weld Reducing Cross Fitting
  • Steel Reducing Cross Pipe Fittings
  • High quality Unequal Cross
  • Butt Weld Reducing Cross Pipe Fittings
  • ASME B16.28 Buttweld Pipe Cross
  • Buttweld Barred Cross
  • Cross Fitting
  • Buttweld Equal Cross Fitting

ANSI/ASME B16.9 Butt weld Equal Cross

Schedule: Sch 5 TO Sch XXS.

Sizes: 1/2” TO 36” (SEAMLESS UPTO 24”) & (WELDED 8” TO 36” )

Type: Butt Weld (BW)

Thickness: Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and costumised.

Standards: ANSI – B 16.9

  • ASTM A403 – ASME SA403 – ‘Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings’
  • ASME B16.9 – ‘ Wrought Buttwelding Fittings”
  • ASME B16.25 – ‘Buttwelding Ends’
  • ASME B16.28 – ‘Wrought Steel Buttwelding Short Radius Elbows and Returns’
  • API 590-605
  • MSS SP-43 – ‘Fabricated & Wrought Butt-Welding Fittings for Corrosion Resistant, Low Pressure Applications’

Get in touch

Welcome to Sunny Steel Enterprise Ltd.

Sunny Steel provide a wide range of steel products as Steel pipes, Seamless tube and seamless pipes, Alloy pipes, Pipe fittings, Composite steel pipe used in the industry, construction etc.


Contact Form

Name

Email *

Message *

Popular posts from this blog

Barred Tee

Image
A barred tee is a tee or any fitting with a branch used in pipelines that is pigged and has a restriction bar welded internally preventing the pig from traveling down a branch connection. Barred tee is a pipe fitting that is used in a pig launcher or receiver system in a piping system to ensure the pig could pass the branch safely. Design considerations for barred tee The barred tee will be used when there is a requirement for pigging. Thus, many of its applications can be found in the pipeline or in the subsea field. The bar plates that welded internally at the branch are to avoid the pig from changing direction or getting stuck at the branch outlet. The design of the bar plates must be in sufficient quantity, thickness and adequately spaced to ensure the smoothness for the pig to run through the main pipe, and at the same time not affecting the flow that was meant to flow through the branch. Normal practice is to ensure that the opening in the branch pipeline after gui
Read more

Saddle previously

Image
Saddle previously is the ventilation ducts 'crotch tee', its shaped like pants, there Equal and unequal diameter, the formal name is "tube tapered pants tee." Carbon steel saddle previously There is no standard size, to be based on three tube spacing center line of the front and graphic design draw graphics, Lofting produced, lofting a certain degree of difficulty. We are manufacturer of Saddle previously and supply high quality Saddle previously in both large and small quantities worldwide & offer you the best prices in the market. Size range: 1/2 to 72 inches Sheet metal is engaging, steel welding. Industrial Processes Type: Sweepolet Saddle, Steel Saddle, Carbon Steel Saddle, Stainless Steel Saddle, Alloy Steel Saddle Applications of saddle previously: Saddle previously is to replace the existing tee fitting, the use of flexibility, praised by domestic and foreign markets. Saddle pre
Read more

How to Calculate a Pipe Bend?

Image
Pipe fittings are necessary to join together pipes, or to change the direction of an existing pipe. Pipes and pipe fittings are made of a variety of materials, depending on the fluid or gas being transported. Most pipe fittings tend to be either threaded or able to slip over the pipes they connect. Whether you are using steel pipes of PVC pipes, a chemical solvent is required to create a seal between the pipe and the fittings. Measure the required length of the pipe to be installed, keeping in mind the extra length required where the pipe will be inserted into the fitting. Mark this length on the pipe. How to Calculate a Pipe Bend Whether you are bending pipe for running electrical conduit or a metal project, calculating the bend for the start and end point can be an important factor. While there are different types of pipe benders on the market, they all share a common identification for the operation. Identified on all pipe benders is the size of pipe the unit will bend alon
Read more