Equal tees
Equal Tee (or straight tee), means the branch diameter of this tee is same with the main pipe (Run pipe) diameter of this tee.
The equivalent tee (or straight tee) is utilised as the branch has the same distance across as the run pipe. Equal Tee are equipped for taking care of any high or low weight stream of fluid through it. The equal tee are with the same channel and outlet sizes, however, customers can profit from us “decreasing” tees too that have maybe a couple closes with various in measurement, this is called an equal tee. Because of their dimensional contrast, these tee fittings help with the ability to control the volume when required.
Our scope of Equal Tee and Equal Cross are impeccably built utilising most recent innovation and are generally utilised as a part of differing piping frameworks crosswise over commercial ventures. Faultlessly built to flawlessness utilising most recent machines and innovation, these pipe fittings are broadly utilised as a part of a large number of commercial ventures far and wide. Durable in quality, these pipe fittings are accessible at competitive prices.
Stainless steel threaded equal teeFEATURES OF EQUAL TEE
- There are three female openings in a ‘T’ formed pipe tee.
- There are straight pipe tees which have the same size openings.
- Equal tee make them open of various size and two openings of the same size.
- There are sterile equal tees which are utilised as a part of waste lines.
- These sort of equal tees have a bent branch which is intended for a wipe outfitting. They are utilised to avoid hindrance of waste.
- An equal tee has dragged to attach the fitting to a divider or stud.
- An equal tee utilises pressure fittings on two or more finishes.
- An equal tee has a strong opening. This opening is utilised as a part of conjunction with a strong fitting for a get out an opening on a drain pipe.
Materials
They are manufactured utilizing higher grade raw material, advanced machines and technologies.
- Abrasion resistant: Cearmic lined, Ceramic tile, Bi-metal clad pipe bending, Rare earth alloy wear-resistant pipe bending
- Carbon steel:
- SA234 WPB, SA234 WPC,SA42 WPL6, SA42 WPL3
- WP1. MSS-SP75, WPHY,WPHY 46,WPHY 52
- WPHY 56,WPHY 60,WPHY 65, WPHY 70
- DIN 1629 St37, RST37.2 St52, STPG38
- Stainless:
- ASTM/ASME SA403 304,304L ,316, 316L, WP304L, 3 WP316 WP347 (H) ,WP317 (L),WP321.
- DIN 1.4301, 1.4306, 1.4401, 1.4571
- JIS SUS304,SUS304, SUS304L, SUS316, SUS316
- Alloy:
- ASTM/ASME SA234 WP12, WP11,WP22, WP5, WP9, WP91, ASTM B361 GR.3003-6061, ASTM B366 UNS
- N04400,N08800, N08825 N1001-N10276-N10665, WPT2-WPT12
- ASTM 182 F1, F5, F6, F7, F9, F11, F12, F22, F51, 16MnR Cr5Mo
- 12Cr1MoV 10CrMo910 15CrMo 12Cr2Mo1, St45.8
Buying Tips of pipe tee
What should buyers consider for bulk purchase of pipe tees?
- Type of pipe tee—whether welded or seamless
- Standard
- Size and dimension
- Wall thickness
- Material of construction
- Durability and Economical
- High pressure and temperature resistance
- Corrosion resistance etc.
Applications of pipe tee:
Pipe Tees are widely used in various commercial and industrial applications. Industrial applications include:
- Chemical processing
- Petroleum
- Pulp/paper
- Refining
- Textile
- Waste treatment, Marine
- Utilities/power generation
- Industrial equipment
- Automotive
- Gas compression
- Distribution industries
- Industrial plant fluid power systems.
Pipe tee FAQs
Pipe Tee is a type of pipe fitting which is T-shaped having two outlets, at 90° to the connection to the main line. It is a short piece of pipe with a lateral outlet. Pipe Tee is used to connect pipelines with a pipe at a right angle with the line. Pipe Tees are widely used as pipe fittings.
Hot forming
Tees using raw material with a bigger diameter than the finished product, the branch outlet is extruded from pipe while the main body is being pressed.
The outlet's wall thickness can also be adjusted as needed. Applied to Tees with large diameters, heavy wall thickness and/or special material with challenging workability that cannot be manufactured using the hydraulic bulge method.
Bevelled Ends
The ends of all buttweld fittings are bevelled, exceeding wall thickness 4 mm for austenitic stainless steel, or 5 mm for ferritic stainless steel. The shape of the bevel depending upon the actual wall thickness. This bevelled ends are needed to be able to make a "Butt weld".
Welding Bevel acc.to ASME / ANSI B16.9 and ASME / ANSI B16.28
ASME B16.25 covers the preparation of buttwelding ends of piping components to be joined into a piping system by welding. It includes requirements for welding bevels, for external and internal shaping of heavy-wall components, and for preparation of internal ends (including dimensions and dimensional tolerances).
Our in-hourse R&D team developed bevel ends equipment are good using in thickness 2mm to 20mm pipe fittings, guarantee high efficiency and high quality.
Send us your technical drawings
These weld edge preparation requirements are also incorporated into the ASME standards (e.g., B16.9, B16.5, B16.34).
ASME B16.25 (BUTT WELD ENDS)
ASME B16.25 sets standards for the preparation of the ends of components that need to be welded together.
Cut square or slight chamfer, at manufacturer’s option for :
- t ≤ 0.19” carbon steel or ferritic alloy steels
- t ≤ 0.12” austenitic alloy steels
Buttweld Fittings general
A pipe fitting is defined as a part used in a piping system, for changing direction, branching or for change of pipe diameter, and which is mechanically joined to the system.
There are many different types of fittings and they are the same in all sizes and schedules as the pipe.
Pipe tee & Crosses size
Pipe Tee, LT, Lateral tee , RT, Reducing tee, Tee fittings accord to ANSI, ISO, JIS and DIN Standards, Measures 1/2 to 56 Inches.
| Pattern | Weld | Seamless |
| Nominal size | 1/2”-48” (DN15-DN1200) | 1/2”-20” (DN15-DN500) |
| Wall thickness | 2-100mm | 2-50mm |
| Bend radius | SCH5S-SCH160 ,XXS | SCH5-SCH160 |
| Type | Tee/reducing tee | Tee/reducing tee |
Most common are tees with the same inlet and outlet sizes, but 'reducing' tees are available as well. it means the one or two ends are differ in dimension.due to thisdimension differ,the makes the tee fittings with the capacity to control the volume when requried.
| Nominal pipe DN size |
Outside Diameter at Bevel | Center to End | ||||
| D1 | D2 | C | M | |||
| Series A | Series B | Series A | Series B | |||
| 20×15 | 26.9 | 25 | 21.3 | 18 | 29 | 29 |
| 25×20 25×15 |
33.7 33.7 |
32 32 |
26.9 21.3 |
25 18 |
38 38 |
38 38 |
| 32×25 32×20 32×15 |
42.4 42.4 42.4 |
38 38 38 |
33.7 26.9 21.3 |
32 25 18 |
48 48 48 |
48 48 48 |
| 40×32 40×25 40×20 40×15 |
48.3 48.3 48.3 48.3 |
45 45 45 45 |
42.4 33.7 26.7 21.3 |
38 32 25 18 |
57 57 57 57 |
57 57 57 57 |
| 50×40 50×32 50×25 50×20 |
60.3 60.3 60.3 60.3 |
57 57 57 57 |
48.3 42.4 33.7 26.9 |
45 38 32 25 |
64 64 64 64 |
60 57 51 44 |
| 65×50 65×40 65×32 65×25 |
76.1(73) 76.1(73) 76.1(73) 76.1(73) |
76 76 76 76 |
60.3 48.3 42.4 33.7 |
57 45 38 32 |
76 76 76 76 |
70 67 64 57 |
| 80×65 80×50 80×40 80×32 |
88.9 88.9 88.9 88.9 |
89 89 89 89 |
76.1(73) 60.3 48.3 42.4 |
76 57 45 38 |
86 86 86 86 |
83 76 73 70 |
| 90×80 90×65 90×50 90×40 |
101.6 101.6 101.6 101.6 |
- - - - |
88.9 76.1(73) 60.3 48.3 |
- - - - |
95 95 95 95 |
92 89 83 79 |
| 100×90 100×80 100×65 100×50 100×40 |
114.3 114.3 114.3 114.3 114.3 |
- 108 108 108 108 |
101.6 88.9 76.1(73) 60.3 48.3 |
- 89 76 57 45 |
105 105 105 105 105 |
102 98 95 89 86 |
| 125×100 125×90 125×80 125×65 125×50 |
139.7 139.7 139.7 139.7 |
133 - 133 133 133 |
114.3 101.6 88.9 76.1(73) 60.3 |
108 - 89 76 57 |
124 124 124 124 124 |
117 114 111 108 105 |
| 150×125 150×100 150×90 150×80 150×65 |
168.3 168.3 168.3 168.3 168.3 |
159 159 - 159 159 |
139.7 114.3 101.6 88.9 76.1(73) |
133 108 - 89 76 |
143 143 143 143 143 |
137 130 127 124 121 |
| 200×150 200×125 200×100 200×90 |
219.1 219.1 219.1 219.1 |
219 219 219 - |
168.3 139.7 114.3 101.6 |
159 133 108 - |
178 178 178 178 |
168 162 156 152 |
| 200×200 200×150 200×125 200×100 |
273.0 273.0 273.0 273.0 |
273 273 273 273 |
219.1 168.3 139.7 114.3 |
219 159 133 108 |
216 216 216 216 |
208 194 191 184 |
| 300×250 300×200 300×150 |
323.9 323.9 323.9 |
325 325 325 |
273.0 219.1 168.3 |
273 219 159 |
254 254 254 |
241 229 219 |
| 300×125 | 323.9 | 325 | 139.7 | 133 | 254 | 216 |
| 350×300 350×250 350×200 350×150 |
355.6 355.6 355.6 355.6 |
377 377 377 377 |
323.9 273.0 219.1 168.3 |
325 273 219 159 |
279 279 279 279 |
270 257 248 238 |
| 400×350 400×300 400×250 400×200 400×150 |
406.4 406.4 406.4 406.4 406.4 |
426 426 426 426 426 |
355.6 323.9 273.0 219.1 168.3 |
377 325 273 219 159 |
305 305 305 305 305 |
305 295 283 273 264 |
| 450×400 450×350 450×300 450×250 450×200 |
457.2 457.2 457.2 457.2 457.2 |
478 478 478 478 478 |
406.4 355.6 323.9 273.0 219.1 |
426 377 325 273 219 |
343 343 343 343 343 |
330 330 321 308 298 |
| 500×450 500×100 500×350 500×300 500×250 500×200 |
508.0 508.0 508.0 508.0 508.0 508.0 |
529 529 529 529 529 529 |
457.2 406.4 355.6 323.9 273.0 219.1 |
478 426 377 325 273 219 |
381 381 381 381 381 381 |
368 356 356 346 333 324 |
| 550×500 550×450 550×400 |
559 559 559 |
- - - |
508 457 406 |
- - - |
419 419 419 |
406 394 381 |
| 600×550 600×550 600×450 |
610 610 610 |
- 630 630 |
559 508 457 |
- 530 480 |
432 432 432 |
432 432 419 |
| 650×600 650×550 650×500 |
660 660 660 |
- - - |
610 559 508 |
- - - |
495 495 495 |
483 470 457 |
| 700×650 700×600 700×550 |
711 711 711 |
- 720 - |
660 610 559 |
- 630< - |
521 521 521 |
521 508 495 |
| 750×700 750×650 750×600 |
762 762 762 |
- - - |
711 660 610 |
- - - |
559 559 559 |
546 546 533 |
| 800×750 800×700 800×650 |
813 813 813 |
- 820 - |
762 711 660 |
- 720 - |
597 597 597 |
584 572 572 |
| 850×800 850×750 850×700 |
864 864 864 |
- - - |
813 762 711 |
- - - |
635 635 635 |
622 610 597 |
| 900×850 900×800 900×750 |
914 914 914 |
- 920 - |
864 813 762 |
- 820 - |
673 673 673 |
660 648 635 |
| 950×900 950×850 950×800 |
965 965 965 |
- - - |
914 864 813 |
- - - |
711 711 711 |
711 698 686 |
| 1000×950 1000×900 1000×8500 |
1016 1016 1016 |
- 1020 - |
965 914 864 |
- 920 - |
749 749 749 |
749 737 724 |
| 1000×1000 1050×950 1050×900 |
1067 1067 1067 |
- - - |
1016 965 914 |
- - - |
762 762 762 |
711 711 711 |
| 1100×1050 1100×1000 1100×950 |
1118 1118 1118 |
- 1120 - |
1067 1016 965 |
- 1020 - |
813 813 813 |
762 749 737 |
| 1150×1100 1150×1050 1150×1000 |
1168 1168 1168 |
- - - |
1118 1067 1016 |
- - - |
851 851 851 |
800 787 775 |
| 1200×1150 1200×1100 1200×1050 |
1220 1220 1220 |
- 1220 - |
1168 1118 1067 |
- 1120 - |
889 889 889 |
838 838 813 |
| Nominal pipe size | Outside Diameter at Bevel | Center to End | |||
| D | C | M | |||
| DN | INCH | Series A | Series B | ||
| 15 | 1/2 | 21.3 | 18 | 25 | |
| 20 | 3/4 | 26.9 | 25 | 29 | |
| 25 | 1 | 33.7 | 32 | 38 | |
| 32 | 11/4 | 42.4 | 38 | 48 | |
| 40 | 11/2 | 48.3 | 45 | 57 | |
| 50 | 2 | 60.3 | 57 | 64 | |
| 65 | 21/2 | 76.1(73) | 76 | 76 | |
| 80 | 3 | 88.9 | 89 | 86 | |
| 90 | 31/2 | 101.6 | ― | 95 | |
| 100 | 4 | 114.3 | 108 | 105 | |
| 125 | 5 | 139.7 | 133 | 124 | |
| 150 | 6 | 168.3 | 159 | 143 | |
| 200 | 8 | 219.1 | 219 | 178 | |
| 250 | 10 | 273.0 | 273 | 216 | |
| 300 | 12 | 323.9 | 325 | 254 | |
| 350 | 14 | 355.6 | 377 | 279 | |
| 400 | 16 | 406.4 | 426 | 305 | |
| 450 | 18 | 457.2 | 478 | 343 | |
| 500 | 20 | 508.0 | 529 | 381 | |
| 550 | 22 | 559 | ― | 419 | |
| 600 | 24 | 610 | 630 | 432 | |
| 650 | 26 | 660 | ― | 495 | |
| 700 | 28 | 711 | 720 | 521 | |
| 750 | 30 | 762 | ― | 559 | |
| 800 | 32 | 813 | 820 | 597 | |
| 850 | 34 | 864 | ― | 635 | |
| 900 | 36 | 914 | 920 | 673 | |
| 950 | 38 | 965 | ― | 711 | |
| 1000 | 40 | 1016 | 1020 | 749 | |
| 1050 | 42 | 1067 | ― | 762 | 711 |
| 1100 | 44 | 1118 | 1120 | 813 | 762 |
| 1150 | 46 | 1168 | ― | 851 | 800 |
| 1200 | 48 | 1220 | 1220 | 889 | 838 |
